WEIWEIBEIER 5Pcs Bike Spoke Nipple Wrench 8 Way Spoke Nipple Key Wheel Rim Bicycle Accessory Stainless Steel Repair Tool

Adjust The SpokesIs to adjust the tightness of the spokes to adjust whether the bicycle wheel rotation is on the same plane. In this way, the bike will be more stable.First of all, you need a spoke wrench, shaped like a circle, with 4-6 different sizes of port, suitable for different sizes of spoke cap.There is a 90-degree angle at one end of the spoke that passes through the small hole in the car tray and a spoke cap at the other end that passes through the spoke hole in the ring.The most common type of spoke mesh is a three-wire mesh, i.e. each spoke crosses the other three spokes once.There is a thread between the spoke and the spoke cap, and the spoke cap can be rotated with a spoke wrench to adjust the spoke tightness.However, the tire must be degassed before adjusting the spokes. Otherwise, the rotating spoke cap can easily pundle the inner tube.Adjust the spokes loose in order to keep the ring's zhou zheng. Zhou Zheng of the ring can be observed in three ways:1, the wheels removed, installed in a special school ring frame.2, do not remove the wheel, one hand holding the fork, thumbs up near the inside of the car ring.3, observe the gap between the brakes and the car ring.Either way, the principle is:Turn the wheel, the car ring from the reference gap is large, then tighten the spokes here, the other way around the loose spokes;Somewhere in the circle, the right spoke is tightened and the left spoke is loosened. On the other hand, close to the left, loose to the right.Finally, the gap between the entire car ring and the reference is completely uniform, and the degree of looseness of each spoke is uniform, then the school bus ring is completed.NoteWIDE RANGE: It comes with size 9/10/11/12/13/14/15. This feature ensures one tool fit all spokes. 9>5mm, 10=5mm, 11=4.4mm, 12=3.76mm, 13=3.7mm, 14=3.45mm, 15=3.3mm.WELL MACHINED: The tool is precisely machined with v

• Product introduction：
• Stainless Stain, 9H hardness.
• Silver bicycle spoke wrench,must-have tool for adjusting the spokes to be tightened and correct the deformation of the rim.
• Suitable for spoke nipple sizes 10, 11, 12, 13, 14, 15.
• Small and lightweight, measuring 40mm (1.57in) in diameter and 11mm (0.43in) in height